Soccer Field
(Idea)Since we are making washington D.C. I think we should try to design a copy of RFK stadium. It will not be perfect, but I think it would be cool to try to make a replica of an actual sports arena.
Let me know what you think.
Here are accurate measurements of a soccer field.
Here's a picture of the seating and other parts
The idea is a good idea.
Here is a picture of how we should start with it.
We could use a couple smaller boxes for the entrances and the concession stands. That is the actually stadium is this and we can but the wires in between the bottom and top pieces of cardboard.
May be we could cut cardboard squares for the ring on top of the arena
could we do this on mine craft? It would be easier.
I will make the field and flood lights.
connor: I already started on minecraft. I have the field ready all I need to do is the concession stands and i need to make the stands.
You can check the progress by watching this video. http://youtu.be/cf_I5wC7eCs the new updated process http://youtu.be/tcv4Hpthx2k
On the table TBD means to be determined if you can't decide and try to decide today
Blake and I (Colton) had an idea on where we have a piece of cardboard to support the angle of the stands and, to use fastener bases to make the bleachers with lights in between the rows of bleachers. Also to use duct tape as a look of concrete for the bleachers and entryways. One question still remains, what about the scoreboard??? Someone also needs to find the scale size of the field, too. We could use the Hillyard box as the concession stands and cut it in half and use both halves on the top and bottom of the field. Also to color it so it doesn't look weird.
Name
Job
Colton
Concession
Blake
Outline of field
Austin
TBD
Mateo
score board
Connor
gift shop/ team store
Kanon
Stands
Noah
stands
I dont know anymore jobs plz tell me some.
What we have so far with a fastener base box for the stands.
This is what we could do for the stands with the wires running around or cut holes in it to let the wires run through.
Mateo: You guys have good ideas, I was thinking that we could put small holes in the shapes of numbers in a piece of cardboard and then put lights Behind it.
What are the blue and orange things for because I don't know what they're for.
Kanon: I need you to make the field so I know where to put the stands.
The stands are going to go on the sides and what are the yellow marks at the side closest to the cardboard.
We need someone to elevate the stands with the 1/2 on it use one for each side and if you need to to use more cardboard go ahead. The field is outlined and Kanon can put the stands on the sides. Make adjustments if you need to put we need to have people working on the concession stands and the gift shop. I will work on it more in advisement. Anyone who wants to come help (maybe everyone) can come.
This is the outline of the field.
Mateo:scoreboard is done
I have also added cruddy goals
who needs help with their part? share your thoughts and let me know how I can help.
Kanon: I've gotten started on the stands. Don't through away the square pieces of cardboard.
Blake is painting the field and Kanon needs to realign the stands that are closest to the windows to make it where there are two rows of stands on both sides. Also to make the concession stand.
Mateo: I have finished up the painting on the field
Room/Area
Person Responsible
Number of lights needed
Number of motors needed
Number of switches needed
Other supplies requested
scoreboard
Mateo Anderson
2
0
0
0
gift shop
connor jones
5
3
2
wire and wire stripers.
The pole that is in between the stands will be the lights for the field and we will have to light up each section of the field. Blake, Austin, someone else, and I will work on the section.
Don;t through away anything that is in the gift shop.
Soccer Field
(Idea)Since we are making washington D.C. I think we should try to design a copy of RFK stadium. It will not be perfect, but I think it would be cool to try to make a replica of an actual sports arena.
Let me know what you think.
Here are accurate measurements of a soccer field.
Here's a picture of the seating and other parts
The idea is a good idea.
Here is a picture of how we should start with it.
We could use a couple smaller boxes for the entrances and the concession stands. That is the actually stadium is this and we can but the wires in between the bottom and top pieces of cardboard.
May be we could cut cardboard squares for the ring on top of the arena
could we do this on mine craft? It would be easier.
I will make the field and flood lights.
connor: I already started on minecraft. I have the field ready all I need to do is the concession stands and i need to make the stands.
You can check the progress by watching this video. http://youtu.be/cf_I5wC7eCs the new updated process
http://youtu.be/tcv4Hpthx2k
On the table TBD means to be determined if you can't decide and try to decide today
Blake and I (Colton) had an idea on where we have a piece of cardboard to support the angle of the stands and, to use fastener bases to make the bleachers with lights in between the rows of bleachers. Also to use duct tape as a look of concrete for the bleachers and entryways. One question still remains, what about the scoreboard??? Someone also needs to find the scale size of the field, too. We could use the Hillyard box as the concession stands and cut it in half and use both halves on the top and bottom of the field. Also to color it so it doesn't look weird.
What we have so far with a fastener base box for the stands.
This is what we could do for the stands with the wires running around or cut holes in it to let the wires run through.
Mateo: You guys have good ideas, I was thinking that we could put small holes in the shapes of numbers in a piece of cardboard and then put lights Behind it.
What are the blue and orange things for because I don't know what they're for.
Kanon: I need you to make the field so I know where to put the stands.
The stands are going to go on the sides and what are the yellow marks at the side closest to the cardboard.
We need someone to elevate the stands with the 1/2 on it use one for each side and if you need to to use more cardboard go ahead. The field is outlined and Kanon can put the stands on the sides. Make adjustments if you need to put we need to have people working on the concession stands and the gift shop. I will work on it more in advisement. Anyone who wants to come help (maybe everyone) can come.
This is the outline of the field.
Mateo:scoreboard is done
I have also added cruddy goals
who needs help with their part? share your thoughts and let me know how I can help.
Kanon: I've gotten started on the stands. Don't through away the square pieces of cardboard.
Blake is painting the field and Kanon needs to realign the stands that are closest to the windows to make it where there are two rows of stands on both sides. Also to make the concession stand.
Mateo: I have finished up the painting on the field
Don;t through away anything that is in the gift shop.
Painting the Field